HomeMy WebLinkAboutRADEMACHER 9-25A, RADEMACHER 15-25 - Well Abandonment Report - Kerr McGee - 5/7/2018Status
VISU0640SURF 12+1/4 8+5/8 24 640 450
CBL6,5267,7911ST 7+7/8 4+1/2 11.6 7,791 275
CBL4,4125,176Stage Tool 5,179 285
Casing Type Size of Hole Size of Casing Weight Per Foot Setting Depth Sacks Cement Cement TopCement Bot
Casing History
Subsequent Report of Abandonment
Details:
If yes, explain details below
If yes, explain details below
Yes NoWellbore has Uncemented Casing leaks:
NoYesFish in Hole:
855Estimated Depth:NoYesCasing to be pulled:
Other
Mechanical ProblemsProduction Sub-economicDryReason for Abandonment:
-104.94344740.195764 Longitude:
GPS Data:
Only Complete the Following Background Information for Intent to Abandon
Cody Mattson2.803/19/2009 GPS Instrument Operator's Name:PDOP Reading:Date of Measurement:
Latitude:
90750Field Number:Field Name:WATTENBERG
Federal, Indian or State Lease Number:
Meridian:668W Range:Township:3N 25Section:QtrQtr:
9-25A Well Number:
NESE
County:WELD
Location:
RADEMACHERWell Name:
05-123-20759-00API Number
This form is to be submitted as an Intent to Abandon whenever an abandonment is planned on a borehole. After the abandonment is complete, this
form shall again be submitted as a Subsequent Report of the actual work completed. The approved intent shall be valid for six months after the approval
date, after that period, a new intent will be required. Attachments required with the Intent to Abandon are wellbore diagrams of the current configuration
and the proposed configuration with plugs set.
A Subsequent Report of Abandonment shall indicate the actual work completed. Attachments required with a Subsequent Report are a wellbore
diagram showing plugs that were set and casing remaining in the hole, the job summaries from all plugging contractors used, including wireline and
cementing (third party verification) and any logs that may have been run during abandonment.
State of Colorado
Oil and Gas Conservation Commission
1120 Lincoln Street, Suite 801, Denver, Colorado 80203 Phone: (303) 894-2100 Fax: (303) 894-2109
WELL ABANDONMENT REPORT
FORM
6
Rev
05/18
Notice of Intent to Abandon
cheryl.light@anadarko.comEmail:
(720) 929-7461Fax:
(720) 929-6461Phone:
Zip:80217-
3779
COState:DENVER
P O BOX 173779
Contact Name:
City:
CHERYL LIGHT
Address:
KERR MCGEE OIL & GAS ONSHORE LPName of Operator:
47120OGCC Operator Number:
craig.carlile@state.co.usEmail:
Tel:(970) 629-8279Name:Carlile, Craig For "Intent" 24 hour notice required,
COGCC contact:
05/07/2018
Date Received:
Document Number:
DE ET OE ES
401630562
Formation Perf. Top Perf. Btm Abandoned Date Method of Isolation Plug Depth
CODELL 7196 7216 05/14/2014 BRIDGE PLUG 6910
J SAND 7636 7669 03/22/2007 BRIDGE PLUG 7433
Total: 2 zone(s)
Current and Previously Abandoned Zones
Page 1 of 3Date Run: 10/1/2018 Doc [#401630562] Well Name: RADEMACHER 9-25A
*ATTACH JOB SUMMARY
Technical Detail/Comments:
3/31/2019Expiration Date:
NoYesFlowline/Pipeline has been abandoned per Rule 1105
Type of Cement and Additives Used:
*Cementing Contractor: *Wireline Contractor:
Plugging Date:inch casingft.
of
Additional Plugging Information for Subsequent Report Only
Casing Recovered:
Plug Tagged: Plug Type:
Plug Tagged: Plug Type:
Plug Tagged: Plug Type:
Plug Tagged:CASINGPlug Type:
Plug Tagged:CASING
Plug Tagged:
(Cast Iron Cement Retainer Depth)
CICR Depth
CICR Depth
CICR Depth3900
sacks cmt on top.withCIBP #5: Depth
sacks cmt on top.withsacks cmt on top. CIPB #4: Depth25with80CIBP #3: Depth
Set sacks in mouse holeSetsacks in rat hole
NoYesAbove Ground Dry-Hole Marker:Cut four feet below ground level, weld on plate
25Set sacks at surface
ft.590ft. to955sacks half in. half out surface casing fromSet210
sacks. Leave at least 100 ft. in casingft. withPerforate and squeeze at
sacks. Leave at least 100 ft. in casingft. withPerforate and squeeze at
sacks. Leave at least 100 ft. in casing135ft. withPerforate and squeeze at 4361
ft. ft. tosks cmt fromSet
ft. ft. tosks cmt fromSet
ft. ft. tosks cmt fromSet
ft. 3713ft. to3903sks cmt fromSet15
ft. 6700ft. to7121sks cmt from30Set
sacks cmt on top.7121 with 30sacks cmt on top. CIPB #2: Depth2with7590CIBP #1: Depth
Plug Type:
NOTE: Two(2) sacks cement
required on all CIBPs.
Plugging Procedure for Intent and Subsequent Report
McCoy, Diane
Based on the information provided herein, this Well Abandonment Report (Form 6) complies with COGCC Rules and applicable
orders and is hereby approved.
COGCC Approved:Date:10/1/2018
I hereby certify all statements made in this form are, to the best of my knowledge, true, correct, and complete.
Signed:Print Name:CHERYL LIGHT
Title:Staff Regulatory Analyst Date:5/7/2018 Email:DJREGULATORY@ANADARKO.COM
CONDITIONS OF APPROVAL, IF ANY:
Page 2 of 3Date Run: 10/1/2018 Doc [#401630562] Well Name: RADEMACHER 9-25A
COA Type Description
1) Provide 48 hour notice of plugging MIRU via electronic Form 42.
2) Properly abandon on-location flowlines per Rule 1105. File electronic Form 42 once
abandonment complete. Within 30 days of an operator completing abandonment
requirements for an off-location flowline or crude oil transfer line the operator must
submit a Flowline Report, Form 44.
3) Operator shall implement measures to control unnecessary and excessive venting, to
protect the health and safety of the public, and to ensure that vapors and odors from
well plugging operations do not constitute a nuisance or hazard to public welfare.
4) Please submit gyro survey data with Form 6 Subsequent Report of Abandonment.
Prior to starting plugging operations a bradenhead test shall be performed if there has
not been a reported bradenhead test within the 60 days immediately preceding the start
of plugging operations.
1) If, before opening the bradenhead valve, the beginning pressure is greater than 25
psi, sampling is required.
2) If pressure remains at the conclusion of the test, or if any liquids were present during
the test, sampling is required.
The Form 17 shall be submitted within 10 days of the test. Sampling shall comply with
Operator Guidance - Bradenhead Testing and Reporting Instructions. If samples are
collected, copies of all final laboratory analytical results shall be provided to the COGCC
within three (3) months of collecting the samples.
If there is a need for sampling, contact COGCC engineering for verification of plugging
procedure.
Attachment Check List
Att Doc Num Name
401630562 WELL ABANDONMENT REPORT (INTENT)
401630622 PROPOSED PLUGGING PROCEDURE
401632192 WELLBORE DIAGRAM
401780081 FORM 6 INTENT SUBMITTED
Total Attach: 4 Files
User Group Comment Comment Date
Engineer Moved CIBP to be within 100' of top Codell perf. Increased sacks of cement on
CIBP.
Wellbore diagram shows existing RBPs on the "proposed" side of the wellbore
digram. Operator should clearly show what is existing and what is proposed.
10/01/2018
Permit Ready to pass form.
Codell and J Sand productive interval confirmed via doc# 401089799.
05/24/2018
Well File
Verification
Pass 05/07/2018
Total: 3 comment(s)
General Comments
Page 3 of 3Date Run: 10/1/2018 Doc [#401630562] Well Name: RADEMACHER 9-25A
Status
VISU0689SURF 12+1/4 8+5/8 24 689 465
CBL4,1647,4251ST 7+7/8 4+1/2 11.6 7,425 405
CBL3,9204,147S.C. 1.1 4,170 55
CBL4901,508S.C. 1.2 1,505 220
Casing Type Size of Hole Size of Casing Weight Per Foot Setting Depth Sacks Cement Cement TopCement Bot
Casing History
Subsequent Report of Abandonment
Details:
If yes, explain details below
If yes, explain details below
Yes NoWellbore has Uncemented Casing leaks:
NoYesFish in Hole:
460Estimated Depth:NoYesCasing to be pulled:
Other
Mechanical ProblemsProduction Sub-economicDryReason for Abandonment:
-104.94751040.193539 Longitude:
GPS Data:
Only Complete the Following Background Information for Intent to Abandon
Chris Fisher2.602/13/2006 GPS Instrument Operator's Name:PDOP Reading:Date of Measurement:
Latitude:
90750Field Number:Field Name:WATTENBERG
Federal, Indian or State Lease Number:
Meridian:668W Range:Township:3N 25Section:QtrQtr:
15-25 Well Number:
SWSE
County:WELD
Location:
RADEMACHERWell Name:
05-123-23946-00API Number
This form is to be submitted as an Intent to Abandon whenever an abandonment is planned on a borehole. After the abandonment is complete, this
form shall again be submitted as a Subsequent Report of the actual work completed. The approved intent shall be valid for six months after the approval
date, after that period, a new intent will be required. Attachments required with the Intent to Abandon are wellbore diagrams of the current configuration
and the proposed configuration with plugs set.
A Subsequent Report of Abandonment shall indicate the actual work completed. Attachments required with a Subsequent Report are a wellbore
diagram showing plugs that were set and casing remaining in the hole, the job summaries from all plugging contractors used, including wireline and
cementing (third party verification) and any logs that may have been run during abandonment.
State of Colorado
Oil and Gas Conservation Commission
1120 Lincoln Street, Suite 801, Denver, Colorado 80203 Phone: (303) 894-2100 Fax: (303) 894-2109
WELL ABANDONMENT REPORT
FORM
6
Rev
05/18
Notice of Intent to Abandon
cheryl.light@anadarko.comEmail:
(720) 929-7461Fax:
(720) 929-6461Phone:
Zip:80217-
3779
COState:DENVER
P O BOX 173779
Contact Name:
City:
CHERYL LIGHT
Address:
KERR MCGEE OIL & GAS ONSHORE LPName of Operator:
47120OGCC Operator Number:
craig.carlile@state.co.usEmail:
Tel:(970) 629-8279Name:Carlile, Craig For "Intent" 24 hour notice required,
COGCC contact:
04/15/2019
Date Received:
Document Number:
DE ET OE ES
402005610
Formation Perf. Top Perf. Btm Abandoned Date Method of Isolation Plug Depth
CODELL 7282 7304
Total: 1 zone(s)
Current and Previously Abandoned Zones
Page 1 of 3Date Run: 4/24/2019 Doc [#402005610] Well Name: RADEMACHER 15-25
*ATTACH JOB SUMMARY
Technical Detail/Comments:
10/23/2019Expiration Date:
NoYesFlowline/Pipeline has been abandoned per Rule 1105
Type of Cement and Additives Used:
*Cementing Contractor: *Wireline Contractor:
Plugging Date:inch casingft.
of
Additional Plugging Information for Subsequent Report Only
Casing Recovered:
Plug Tagged: Plug Type:
Plug Tagged: Plug Type:
Plug Tagged: Plug Type:
Plug Tagged:CASINGPlug Type:
Plug Tagged:CASING
Plug Tagged:
(Cast Iron Cement Retainer Depth)
CICR Depth
CICR Depth
CICR Depth3750
sacks cmt on top.withCIBP #5: Depth
sacks cmt on top.withsacks cmt on top. CIPB #4: DepthwithCIBP #3: Depth
Set sacks in mouse holeSetsacks in rat hole
NoYesAbove Ground Dry-Hole Marker:Cut four feet below ground level, weld on plate
Set sacks at surface
ft.0ft. to830sacks half in. half out surface casing fromSet130
sacks. Leave at least 100 ft. in casingft. withPerforate and squeeze at
sacks. Leave at least 100 ft. in casingft. withPerforate and squeeze at
sacks. Leave at least 100 ft. in casing50ft. withPerforate and squeeze at 3890
ft. ft. tosks cmt fromSet
ft. ft. tosks cmt fromSet
ft. ft. tosks cmt fromSet
ft. 3560ft. to3750sks cmt fromSet10
ft. 6715ft. to7200sks cmt from35Set
sacks cmt on top.4100 with 2sacks cmt on top. CIPB #2: Depth35with7200CIBP #1: Depth
Plug Type:
NOTE: Two(2) sacks cement
required on all CIBPs.
Plugging Procedure for Intent and Subsequent Report
McCoy, Diane
Based on the information provided herein, this Well Abandonment Report (Form 6) complies with COGCC Rules and applicable
orders and is hereby approved.
COGCC Approved:Date:4/24/2019
I hereby certify all statements made in this form are, to the best of my knowledge, true, correct, and complete.
Signed:Print Name:CHERYL LIGHT
Title:Staff Regulatory Analyst Date:4/15/2019 Email:DJREGULATORY@ANADARKO.COM
CONDITIONS OF APPROVAL, IF ANY:
Page 2 of 3Date Run: 4/24/2019 Doc [#402005610] Well Name: RADEMACHER 15-25
COA Type Description
1) Provide 48 hour notice of plugging MIRU via electronic Form 42.
2) Properly abandon flowlines per Rule 1105. File electronic Form 42 once
abandonment of on-location flowlines complete. Within 30 days of an operator
completing abandonment requirements for an off-location flowline or crude oil transfer
line the operator must submit a Flowline Report, Form 44.
3) After pumping squeeze, shut down and shut well in at minimum 8 hours; verify gas
migration has been eliminated. If evidence of gas migration or pressure remains contact
COGCC Engineer for an update to plugging orders.
4) If plug at 830' is not circulated to surface then tag plug – must be 400’ or shallower
and provide 15 sack plug at the surface.
Operator shall implement measures to control venting, to protect health and safety, and
to ensure that vapors and odors from well plugging operations do not constitute a
nuisance or hazard to public welfare.
Prior to starting plugging operations a bradenhead test shall be performed if there has
not been a reported bradenhead test within the 60 days immediately preceding the start
of plugging operations.
1) If, before opening the bradenhead valve, the beginning pressure is greater than 25
psi, sampling is required.
2) If pressure remains at the conclusion of the test, or if any liquids were present during
the test, sampling is required.
The Form 17 shall be submitted within 10 days of the test. Sampling shall comply with
Operator Guidance - Bradenhead Testing and Reporting Instructions. If samples are
collected, copies of all final laboratory analytical results shall be provided to the COGCC
within three (3) months of collecting the samples.
Submit Operator's Monthly Production Reports (Form 7) required for compliance with
Rule 309 within 30 days
-Missing production reporting for 8/2013 and 10/2016
Attachment Check List
Att Doc Num Name
402005610 WELL ABANDONMENT REPORT (INTENT)
402008036 PROPOSED PLUGGING PROCEDURE
402008037 WELLBORE DIAGRAM
402019129 FORM 6 INTENT SUBMITTED
Total Attach: 4 Files
User Group Comment Comment Date
Engineer Deepest water well within one mile = 50’
DWR’s aquifer determination tool base of Laramie-Fox Hills = 148’
04/24/2019
Permit Verified as drilled lat/long
Verified completed interval (1966313)
04/16/2019
Well File
Verification
Pass 04/15/2019
Total: 3 comment(s)
General Comments
Page 3 of 3Date Run: 4/24/2019 Doc [#402005610] Well Name: RADEMACHER 15-25